▲Properties, Features & Characteristics: 1．The main ingredient of this product is β -naphthalene sulphonate  formaldehyde condensate. It is a high-purity product with stable physical and chemical properties. 2．Appearance: light brown powder & dark brown liquid. The sodium sulfate content is within 10% and almost no chloride exists. 3．The water reduction of this product is around 19% and about 10-18% of cement can be reserved at the addition rate of 0.75% (for powder) by the total weight of cementing materials. 4．The product is non-toxic, odorless, non-flammable and non-corrosive to steel bars. 5．The product has the properties of high dispersion, low air content, non-air-entraining, high-range water reducing and early-strength improving. It is widely used in pre-cast & ready-mixed concrete, armored concrete and pre-stressed reinforced concrete for large construction projects such as dam and port construction, road building and dwelling house erection etc. 6．Low chloride feature makes it impossible to corrode steel bars underlying concrete. The suitability of the material has been proved by its usage on reinforced and pre-stressed concrete. It is in particular suitable to improve the fluidity of the concrete and increase the durability such as impermeability, carbonation resistance and frost resistance. Therefore it improves the workability of the concrete and makes the concrete easy for pumping and compacting. It can be applied to national key projects bearing good durability and long-term stability. 7．It is compatible with Portland cement, normal Portland cement, Portland slag cement, fly-ash cement and Portland Pozzolanic cement etc. And it is also compatible with other admixtures, such as air-entraining agent, retarder. 8．The suitable temperature for application of this product ranges from -5℃ to +45℃. ▲Usage: 1. The suitable dosage for powder ranges from 0.5 % to 1.2% in line with strength grade and scope of applications. The recommended blend dosage for powder is 0.75% by the total weight of cementitious materials. And the suitable blend dosage for liquid ranges from 1.2 % to 2.8%. The recommended blend dosage for liquid is 1.75% by the total weight of cementitious materials. Of course, users can determine the optimal dosage according to the adaptability of the product and cement. 2．The powdery product can be mixed previously with cementitious materials or dissolved beforehand into liquid state. Do not add it directly into wet aggregate. The liquid product can be added straight or prepared accordingly and diluted to different concentration levels without surrendering any effect. 3．This product is non-toxic, non-corrosive, but inedible. When it contacts with eyes or skin, the affected area shall be immediately rinsed with plenty of water for minutes. Consult physician if irritation persists. 4．When using the powdery product, the user should wear face masks, gloves and other protective products. 5．The product is valid for one year. If it exceeds the validity, it must be tested before deciding to continue to use it or not. ▲Packing & Storage: 1．The powdery product is packed in the waterproofing woven bag with plastic liner and the net weight is25Kg or 40KG per bag or 650MT per big bag .It doesn’t degenerate within its shelf life. The powdery product should be stored in dry and ventilated warehouse. Pay attention not to stave the bag and keep waterproofing during the storage and transportation. If it is affected with damp and agglomeration, it can be dissolved into liquid state or crushed into powder before using it and there is no influence on the performances. 2．The liquid product is sealed in plastic drums or metal drums to prevent accidental leakage and evaporation. And the net weight is 200Kg or 1000KG per drum. Also can be loaded into flexibag with net weight 20MT.